Automated and manual zinc plating, production takes place in turning drums or hanging, with various kinds of chromate conversions, several decades of experience and well trained specialists.

Capabilities:

• Bright, blue, yellow and black chromate conversions
• With Cr III and Cr VI contain
• Well equipped laboratory for quality tests
• ISO certificates
• Assembly activity 

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

For our production process we are basically ensuring the necessary production equipment through two channels:

• Own designed and produced equipment (tools, clamping equipment, measuring equipment)
• Equipment designed and produced by subcontractor (tools, clamping equipment, measuring equipment)

Home production:
In order to support high tool demanding production processes and the first tooling of the new projects, an R&D team is working at our company. The experience of the team and the available machine park make it possible for us to design and produce the next production instruments below:

• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers

Production with subcontractors:
Instruments the fabrication of which requires special machine equipment belong to here. In general, these instruments are needed for the production of semi-finished products that will be machined later.

• Tools for aluminium pressure die-casting
• Tools for cold deformation
• Tools for press forging

Of course, the co-ordination, approval and supervision of the production at subcontractors is the competency of the R&D team.

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
- Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.

Chemically produced coating, parts hanging and in turning drums, made by well-trained experts. Technical coating, mainly applied on parts with wearing surface or products with complicated shape, machine parts.
Capabilities:

• 3-30µ nickel coating with medium (7-9%) phosphate contain.
• With hardening HV approx. .HV 900 hardness can be reached.
• ISO certificates
• Fulfilment of RoHS principles  
• Well equipped laboratory for quality tests.

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Galvanisation is a highly tool demanding technology. The cost of tooling depends on the complication of the parts that will be galvanised. During the support of our production processes and tooling the new projects our engineers always apply most cost effective solutions. In case of parts with smaller volume the special tooling is often not an economical solution. Our engineers and Maintenance Department ensures the design and production of the necessary

• galvanisation hanging tools
• galvanisation turning drums

In our company there are opportunities for the design and production of various other production tools and equipment:
 

• Tools for aluminium pressure die-casting
• Tools for stamping of series or single parts
• Tools for cold deformation
• Tools for press forging
• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers.

Remark: In our company group there are high opportunities for almost any kind of tool production (tools for injection moulding, aluminium die-cast and cold deformation assembly, etc.). Please, visit www.videoton.hu

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
- Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.

Manually controlled and manual nickel plating parts hanging or in turning drums- callipers and also parts with fine thread- we have an experience of decades, with well trained experts :
Capabilities

• Bright
• 3-20µ
• Well equipped laboratory for quality tests.
• ISO certificates
• Assembly activity 

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Galvanisation is a highly tool demanding technology. The cost of tooling depends on the complication of the parts that will be galvanised. During the support of our production processes and tooling the new projects our engineers always apply most cost effective solutions. In case of parts with smaller volume the special tooling is often not an economical solution. Our engineers and Maintenance Department ensures the design and production of the necessary

• galvanisation hanging tools
• galvanisation turning drums

In our company there are opportunities for the design and production of various other production tools and equipment:
 

• Tools for aluminium pressure die-casting
• Tools for stamping of series or single parts
• Tools for cold deformation
• Tools for press forging
• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers.

Remark: In our company group there are high opportunities for almost any kind of tool production (tools for injection moulding, aluminium die-cast and cold deformation assembly, etc.). Please, visit www.videoton.hu

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
- Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.

Manually controlled tin plating with copper and nickel intermediate layer, parts in turning drums we have an experience of decades, with well trained experts:
Capabilities

• Sn 3-15µ, Cu 2-4µ, Ni 2-4µ,
• Well equipped laboratory for quality tests.
• ISO certificates
• Assembly activity 

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Galvanisation is a highly tool demanding technology. The cost of tooling depends on the complication of the parts that will be galvanised. During the support of our production processes and tooling the new projects our engineers always apply most cost effective solutions. In case of parts with smaller volume the special tooling is often not an economical solution. Our engineers and Maintenance Department ensures the design and production of the necessary

• galvanisation hanging tools
• galvanisation turning drums

In our company there are opportunities for the design and production of various other production tools and equipment:
 

• Tools for aluminium pressure die-casting
• Tools for stamping of series or single parts
• Tools for cold deformation
• Tools for press forging
• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers.

Remark: In our company group there are high opportunities for almost any kind of tool production (tools for injection moulding, aluminium die-cast and cold deformation assembly, etc.). Please, visit www.videoton.hu

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
- Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.

Manually controlled silver plating with copper intermediate layer, parts in turning drums we have an experience of decades, with well trained experts:
Capabilities

• Cu 2-4µ, Ag 0.5-20 µ,
• Well equipped laboratory for quality tests.
• ISO certificates
• Assembly activity 

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Galvanisation is a highly tool demanding technology. The cost of tooling depends on the complication of the parts that will be galvanised. During the support of our production processes and tooling the new projects our engineers always apply most cost effective solutions. In case of parts with smaller volume the special tooling is often not an economical solution. Our engineers and Maintenance Department ensures the design and production of the necessary

• galvanisation hanging tools
• galvanisation turning drums

In our company there are opportunities for the design and production of various other production tools and equipment:
 

• Tools for aluminium pressure die-casting
• Tools for stamping of series or single parts
• Tools for cold deformation
• Tools for press forging
• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers.

Remark: In our company group there are high opportunities for almost any kind of tool production (tools for injection moulding, aluminium die-cast and cold deformation assembly, etc.). Please, visit www.videoton.hu

Our company has wide experiences in the mechanical assembly of medium-volume series.

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.(For the assembly we are using our machined parts and those we have purchased)
- Production of paint spraying equipment operating without air (types for industrial and non-industrial use) For the assembly we are using our machined and stamped parts and those we have purchased)
- Assembly of air-filters.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.

Manual and manually controlled copper plating parts in turning drums, we have an experience of decades, with well trained experts:
Capabilities

• Cu 2-15µ
• Well equipped laboratory for quality tests.
• ISO certificates

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Galvanisation is a highly tool demanding technology. The cost of tooling depends on the complication of the parts that will be galvanised. During the support of our production processes and tooling the new projects our engineers always apply most cost effective solutions. In case of parts with smaller volume the special tooling is often not an economical solution. Our engineers and Maintenance Department ensures the design and production of the necessary

• galvanisation hanging tools
• galvanisation turning drums

In our company there are opportunities for the design and production of various other production tools and equipment:
 

• Tools for aluminium pressure die-casting
• Tools for stamping of series or single parts
• Tools for cold deformation
• Tools for press forging
• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers.

Remark: In our company group there are high opportunities for almost any kind of tool production (tools for injection moulding, aluminium die-cast and cold deformation assembly, etc.). Please, visit www.videoton.hu

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
- Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.

Colourless and yellow, parts hanging, we have an experience of decades, with well trained experts
Capabilities:

• Well equipped laboratory for quality tests.
• ISO certificates
• Assembly activity 

Our customers demand engineering activity, cost reduction and planning with cost efficiency. Our production support engineers ensure the best solutions on the critical and important areas. Our continuously developing team of engineers is ready to prepare proper and high level solutions in order to fully satisfy our customers requirements. In case they have the opportunity to join the design work at the early stage, our experienced experts can give you assistance in such solutions that will result in production cost efficiency. These technical specialists work with you in the development of the most effective solutions.

• Besides the improvement of product manufacturing capabilities we offer a creative production planning opportunity.
• Consequently, they bring quality to perfection and reduce production costs.
• When required, they design new technologies, introduce and co-ordinate these.
• They accomplish experimental production planning and co-ordination.
• They prepare PPAP and other documentation.

We offer these services of ours as a part of our own, internally and continuously improved program.

Galvanisation is a highly tool demanding technology. The cost of tooling depends on the complication of the parts that will be galvanised. During the support of our production processes and tooling the new projects our engineers always apply most cost effective solutions. In case of parts with smaller volume the special tooling is often not an economical solution. Our engineers and Maintenance Department ensures the design and production of the necessary

• galvanisation hanging tools
• galvanisation turning drums

In our company there are opportunities for the design and production of various other production tools and equipment:
 

• Tools for aluminium pressure die-casting
• Tools for stamping of series or single parts
• Tools for cold deformation
• Tools for press forging
• The production and regrinding of special machining tools (cutting insert heads, centre drill bits)
• Clamping equipment and fixtures of CNC lathes and centres
• Establishment of workstations for the assembly
• The production of various instruments for measuring, controlling and callipers.

Remark: In our company group there are high opportunities for almost any kind of tool production (tools for injection moulding, aluminium die-cast and cold deformation assembly, etc.). Please, visit www.videoton.hu

Our company has wide experiences in the mechanical assembly of medium-volume series:

References:

- Assembly of oil pumps for internal combustion engines, in which we have an experience of more than 10 years.
- Production of paint spraying equipment.
- Assembly of air-filters

During the production of stamped parts it is very often required to carry out some more simple mechanical assembly tasks where various pressing operations should be applied.
On our eccentric, hydraulic and pneumatic presses by riveting, bending and pressing-in and making packets we prepare different assembly units.

We have experienced in the Automotive Industry that customers need complex supplying services, a portion of which beyond only producing parts, is mechanical assembly.
Our engineering team is ready to prepare the appropriate, high level solutions and fully satisfy the requirements of the customers.

We can undertake:

• Preparation and introduction of new assembly technologies.
• Design, production and co-ordination of the equipment for the proposed technology.
• Transfer of the already existing assembly activities.
• Sample design and production.
• Experimental production planning and co-ordination.